Knives in stock
 
 
 
 
Home        Knife Gallery FAQ/Policy
Knives in stock From our customers
Custom/quote Order form Contact
 
 
 
 

 
 
These are a few knives that I have made that did not have owners, or for shows. These are all 440-C Stainless steel unless otherwise stated. These are all handmade the same as the custom orders. The only difference is if you buy one you will only have to wait a couple days to have it. Not weeks like the custom orders.
 
I can now also take credit cards over the phone, use the contact me page to get in touch if you would like to take advantage of this service
 
 
 
 
 

 
 
 
This is the new Coyote Hunter this knife is the prototype for this model. It has a 5.25 inch blade and is 10 inches over all in length. So a medium fixed blade knife that will go with you anywhere. This knife has a brass cross guard along with brass hardware, it can be made with German silver instead, but there will be an additional charge for the German silver. The scales are a resin design that I made myself, yes I can get close to the same effect if you like them. The knife comes with it's own custom sheath that can be stamped with your initials. As always it will ship for free in the U.S.A. The cost for this knife is $100.00 even.


coyote

coyote

coyote


Coyote Hunter  
$100.00


 
 
 
 

 
 
 
The Camp knife with some special scales ! Made from Cholla cactus, stabilized and impregnated with red resin, with yellow spacers and liners, these scales cost more. So this Camp knife will be $135.00 shipped with a leather sheath in the United States. Love the look of this, can be done in other colors as well.


coyote

coyote

coyote


Cactus Camp knife  
$135.00


 
 
 
 

 
 
 
This is called the Super Camp knife. This is a hidden tang knife with a 6.75 inch blade, blood groves, and gimping. The guard is nickle silver and very small for the bush crafters out there. The spacers are an acrylic material and are green and black. You can have just about any color you want for spacers, but this one is green and black. Arizona Ironwood handle with stainless pins with a nickle silver pommel. It will ship with the sheath pictured that can be stamped with your initials. The blade can aslo be etched with just about any name you want, for an additional charge. This knife ships for $175.00


super

super

super

super

Super Camp knife  
$175.00


 
 
 

 
 
 
This is a Survival/fighting combat knife that I made and messed up a little bit. I used stainless steel pins on the integral cross guard in two places. So the price will reflect my mistake. This knife is 3/16 thick with a 7.5 inch blade. It is a full tang with German Silver cross guard and skull splitter. The top is sharpened for about two inches and the teeth are split in the middle. The handle is Cocobolo hard wood with 2 JP bolts holding it together. The knife will ship with a Kydex sheath. Since this knife has an obvious asthetic mistake the price will be $175.00 shipped anyplace in the U.S. or to a service member over seas.


survco

surv

super

super



Survival/combat knife  
175.00


 
 
 
 
 

 
 
 
Nice Gator skinner with a hidden tang. Very sharp and very very usefull with that curved handle. German silver guard with maroon micarta then more German silver and a whitetail crown. This is a very pretty knife, may not last long. As always ships with a custom sheath and shipping is free in the U.S.


survco

surv

super

super



Skinner  
$180.00


 
 
 
 
 

 
 
This is a Bowie knife I made for a show I missed. So it is here now. This one has a 9 inch blade that is 2 inches wide. The handle has red and white spacers for accent with Arizona Ironwood for the main handle. The cross guard is nickle silver as is the pommel. The steel is all one piece and goes through the whole handle, as in all of my knives. This knife will ship with a custom sheath as always and for free. There is very little room for etching on this blade as the blood groove goes all the way through the knife. This was my first knife with that feature. It can be yours for $210.00


super

super

super

super

super


Bowie knife  
$210.00


 
 
 
 
 

 
 
 
This is my camp knife with a German silver cross guard, blue spacers along with Cocobolo scales for the handle. This knife also has some vine file work on the spine of the handle with some yellow epoxy for accent. This knife has a small problem in that epoxy with air bubbles. So the price will reflect that. You can own this piece of craftsmanship for the low price of $130.00 with a leather sheath and shipped in the U.S.


camp

camp

camp


Camp knife with file work  
$130.00


 
 
 
 

 
 
 
 
This is a historically accurate D-guard Bowie. Made for officers during the war of northern aggression in place of a saber. This knife has a 10.25 inch blade of 440-C stainless steel with a solid 3/16 x 3/4 brass D guard. The handle is a deer antler tine. This knife will come with the leather sheath shown in the pictures, as always it ships free in the U.S. As always as well you can have just about anything etched onto the blade.


Dguard

Dguard

Dguard

Dguard

D-guard Bowie  
$250.00


 
 
 
 

 
 
The Gator skinner is 440-C stainless steel 3/16 of an inch thick, with a German silver cross guard and Cocobolo scales (handle) with green liner. The thumb ramp has gimping into the cross guard. The blade is 5.75 inches long with an overall length of 10.25 inches. This knife is based on what I myself would like when skinning a deer. This is the prototype for this knife. You can own it for $140.00 shipped in the U.S.


Skinner

skinner

skinner

skinner

Gator Skinner  
$140.00


 
 
 
 

 
 
The Gator skinner is 440-C stainless steel 3/16 of an inch thick, with a German silver cross guard and Arizona Ironwood scales (handle) with yellow liner. The thumb ramp has gimping into the cross guard. The blade is 5.75 inches long with an overall length of 10.25 inches. This knife is based on what I myself would like when skinning a deer. Comes with a custom sheath. You can own it for $140.00 shipped in the U.S.


Skinner

skinner

Gator Skinner  
$140.00


 
 
 
 

 
 
Large 8 inch Bowie with blood grooves, has an over all length of 13.5 inches. German silver cross guard with a yellow Corian spacer then some stabilized Flaming Box Elder topping it off with a German silver pommel. Making this one beautiful knife ! Razor sharp and ready to go ! 440-C Stainless steel. Comes with the sheath and shipped for $155.00. This one may not last !
 
 
 
 
 
$155.00
 
 
 

 
 
Nice variant of my camp knife with a German silver cross guard and some very pretty Buck Eye Burl for the handle scales. Gimping on the spine for your thumb gives this knive a very good feel in the hand. Knife ships with a leather sheath that can have your initials stamped onto it for $90.00 This knife can also have your name etched on the side if you like for an additional $30.00.
 
 
 
 
 
$90.00
 
 
 

 
 
This is a fox skinner with a few differences the cross guard is German silver along with being reshapped to make a very pretty knife. This knife has a 5 1/2 inch blade with an overall length just over 9 inches. The handle has a green liner with Arizona Iron wood with a very nice grain. It comes with a sheath and as always shipping is free. You can own this knife for $95.00. This knife can also have your name etched on the side if you like for an additional $30.00.
 
 
hunt/skin
 
hunt/skin
 
hunt/skin
 
$95.00
 
 
 

 
A full tang Bowie knife that has an 8.25 inch blade of 440-C stainless steel with blood grooves. This knife has German silver hardware along with an off-set cross guard. The handle is made of black Corian and Cocobolo hard wood. Using stainless steel Loveless bolts to hold it all together. The cross guard is 1/4 inch thick while the back pommel was made from 1/2 inch solid German silver. The overall length of this beauty is 13.75 inches. It can be yours for $200.00 shipped with the sheath and a case. As always shipping is included.


Bowie

Bowie

Bowie


SOLD


 
 
 

 
 
This is a sturdy hunter/skinner called the Black Bear made from 440-C stainless steel it has a 5.5 inch blade is 10.75 inches overall length. Comes with a custom sheath, has German silver cross guard, and Black Walnut burl handles/scales and a red liner/spacer. This is one very pretty knife for $95.00 This knife can also have your name etched on the side if you like for an additional $30.00.
 
 
hunt/skin
 
hunt/skin
 
SOLD
 
 

 
 
 
 
This is a fighter style and has a 7.25 inch blade, 440-C stainless steel, with a stainless steel cross guard, Micarta spacer, German silver spacer with a Zebra wood handle. This knife comes with a leather sheath.
 
fighter
 
fighter
 
SOLD
 
 
 
 

 
 
This is a sturdy hunter/skinner called the Black Bear made from 440-C stainless steel it has a 5.5 inch blade is 10.75 inches overall length. A German Silver cross guard really sets off the Arizona Ironwood scales held on with stainless steel Corby bolts. This knife comes with a custom leather sheath. This knife can also have your name etched on the side if you like for an additional $30.00.
 
 
 
hunt/skin
 
nunt/skin
 
 
SOLD

 
 
This is a mini-cleaver made from 440-C stainless steel 3/16 of an inch thick. It has Cocobolo scales (handle) with brass Loveless bolts. This one also comes with a lanyard you can see in the pictures, there is also thumb gimping on the top. The mini-cleaver comes with a Kydex sheath that is also pictured.


Skinner

skinner

skinner

SOLD  


 
 
 
 

 
 
 
 
I had some extra jade left over from another knife and decided to put it on this skinner. This is the Fox skinner with Jade and Cocobolo, brass cross guard and brass fittings. It is made from 3/16 thick 440-C with a 5 inch blade. Shipping in the U.S. is free like always.
 
jade
 
jade
 
 
SOLD
 
 
 
 

 
 
This was another one that was made for a show. This is the Fox skinner with a stainless steel cross guard, with turquoise and German silver, along with some beautiful Cocobolo to finish the handle nicely. Made from 9 and 3/4 inches of 440-C stainless steel, 5 inches of which is the blade, this is a sweet little knife. Shipping in the U.S. is free like always.
 
 
tskinner
 
tskinner
 
SOLD
 
 
 

 
 
This is a large Bowie that I had rolling around in my head and decided to make. This is 440-C stainless steel 16.5 inches overall with 10.5 inches of that the blade. German silver cross guard and pommel along with accents in the handle. The handle is made from Arizona Ironwood with a half inch piece of ivory Corian at about the middle. It comes with a leather sheath but no case as I do not have a case to fit it yet.
 
bowie
 
bowie
 
bowie
 
Sold
 
 
 
 
 
 

 
 
 
Nice Bowie with some file work on the spine. The blade is 7.25 inches, 440-C stainless steel, with German silver cross guard and butt. Light blue accents to the Arizona Ironwood handle, also the blood groove goes all the way through the blade. The small amount of file work on the spine gives this knife a special look, truly a one of a kind knife if that is what you are loking for. The knife ships with a custom hand made sheath shown in the last picture, as always with your initials stamped on for free. shipping in the U.S. is always free.


blue

blue



SOLD


 
 
 
 
 

 
 
 
This is a Bowie I made for a show. It has a 7.25 inch blade by about 2 inches. Brass cross guard and solid brass pommel with a deer antler handle. This knife also has blood grooves. Which is why I am selling it here, the blood grooves are not 100%. They are slightly off on each end. So the price will reflect that as well. If you would like to see the close ups of the grooves let me know.
 
bowie
 
bowie
 
SOLD
 
 
 

 
 
LEGAL:   Must Be 18 years old to purchase it's the LAW. The maker / owner or its affiliates of  Rebel Blades are NOT responsible should you, hurt, cut, maim or kill any animals, yourself or others with our knives.  Seek professional guidance before using our knives. By accepting and using this our knives  you are accepting all responsibilities and will NOT hold the maker / owner or its affiliates or Rebel Blades responsible for ANY Illegal activities or lawsuits. You are responsible for knowing your own states laws.