Rebel Blades
 
 
Knife Gallery 
 
 

 
Home        Knife Gallery FAQ/Policy
Knives in stock From our customers
Custom/quote Order form Contact
 

 
All of these knives are HIGHLY customizable, for example if you would like a German silver cross guard on your knife that can be arranged. The cost will not be the same, however in most cases the cost for a German silver guard is minimal. Just email me to arrange the knife that you want.
 
You can purchase any of these knives on the order form page. All prices are there as well.
 
 
All prices are on the order page
 
 
 
Official PayPal Seal
 




We can now take credit cards over the phone if you prefer. Just contact me through email to make arrangements. Also you do not need a Paypal account to pay with Paypal, you can pay with a credit card as a guest !


All prices are on the order page !
 
 

 
 
This page is set up with my production knives at the top, and blades I have made either for shows or orders at the bottom. If you see something you like but can not figure out how to buy it, that is probably because it is already sold. If you like a knife and are curious as to how much it is, use the Custom Quote page.
 
 
 

 
 
 
This is the new Coyote Hunter, it has a 5.25 inch blade and is right at 10 inches over all in length. This knife comes with a brass cross guard and hardware, but can be changed to German silver for an additional fee. It is shown here with resin scales that were made playing around in the shop one night. This knife ships with a custom sheath with your initials stamped on it, and as always free shipping in the U.S.


coyote

coyote

coyote


 
 
 
 

 
 
 
This is the Super Camp knife. This is a hidden tang knife with a 6.75 inch blade, blood groves, and gimping. The guard is nickle silver and very small for the bush crafters out there. The spacers are an acrylic material and are green and black. You can have just about any color you want for spacers, but this one is green and black. Arizona Ironwood handle with stainless pins with a nickle silver pommel. It will ship with the sheath pictured that can be stamped with your initials. The blade can aslo be etched with just about any name you want, for an additional charge. This knife ships for $175.00


super

super

super

super

 
 
 
 
 

 
 
fighter
 
fighter
This is the Rebel Blades Survival/Fighting knife
 
It is 440-C stainless steel 3/16 of an inch thick, and has a 7.5 inch blade, 13.75 inches over all length. The built in cross guard is German Silver or stainless steel along with the skull crusher on the butt. The handles are black Corian held on with J.P. bolts. This knife will come with a Kydex sheath. Of course you can change the handle material to fit your preference. Yes the top edge is sharpened for about 2 inches. It is NOT a false edge. This is one mean knife !  The blade is hollow ground, as are most of my knives. This knife takes a little more time so the price will be $235.00 with free shipping in the U.S.. Just go to the order form page to buy it.
 
 
 
 

 
 
Caribou Hunter
 
This is the Caribou Hunter
 
It is 440-C stainless steel 3/16 inches thick, and has a 6.5 inch blade, 11.5 inches over all length, with a solid brass 3/8 inch cross guard, along with 3 solid brass 1/8 loveless bolts. The handle is Cocobolo but can be changed to fit your preference. This one also has green and black spacers between the handle and the tang and the handle and the guard, which can also be changed to fit your preference.  The blade is hollow ground, as are most of my knives. This knife can be yours for $105.00 with a custom leather sheath, and ships for free. Just go to the order form page to buy it.
 
 

Knife


Here it is with a Leopard wood handle and red and yellow spacers.





 
 
 
Camp knife
 
This is the Camp knife
 
440-C stainless steel 5.25 inch blade, 3/16 inches thick, 9.75 over all length with jimping for the thumb. Solid brass 1/4 inch cross guard set at a slight angle, with red spacer material and a Cocobolo handle. Two 3/16 loveless bolts, brass and stainless hold it together. You of course get to pick your own color for spacer material, along with your own wood, or Corian, Micarta, or what ever you like. This one is also hollow ground. The Camp knife sells for $80.00 with a custom leather sheath and free shipping. Just go to the order form page to buy it.
 
Camp knife
 
Here this one is with a nice Buckeye Burl handle
 
Camp knife
 
This one has Black Walnut scales with yellow spacer material. Also with the lanyard hole and lanyard.
 
Camp knife
 
Camp knife
 
This is a camp knife with the owners name etched onto the blade. Ask me about this service !
 
 
 

 
 
This is the Black Bear hunter/skinner that is pretty much an all around knife. The knife is 440-C stainless steel with a German Silver cross guard. It has a 5.5 inch blade, 10.75 inches overall length, full tang. This one has Arizona Ironwood scales with 3 stainless Corby bolts holding it all together. This knife will sell for $95.00 shipped with a custom leather sheath. Just go to the order form page to buy it.
 
 
hunter/skinner
 
hunt/skin
 
hunter/skinner
 
 
 

 
 


The Gator Skinner

440-C Stainless steel, 3/16 of an inch thick, with a 5.75 inch razor sharp blade, 10.25 inches over all length, with a thumb ramp and jimping. Solid 3/8 inch German silver cross guard. Mostly a curved blade with a downward angled handle to help while skinning. Also hollow ground. The Gator Skinner sells for $140.00 with a custom sheath and free shipping. Just go to the order form page to buy it.


Skinner

skinner

skinner

skinner




Skinner

The Deer Skinner

440-C Stainless steel, 3/16 of an inch thick, with a 6 inch razor sharp blade, 11 inches over all length, with a thumb ramp and jimping. Solid 3/8 inch brass cross guard. This one has Paduak wood handles with a strip of Birch, held together with 1/4 inch brass Corby bolts. You will be able to pick your own handle material, along with spacers. Also hollow ground. The Deer Skinner sells for $95.00 with a custom sheath and free shipping. Just go to the order form page to buy it.
deerelder

deerelder





The Fox Skinner


Fox Skinner





Five inches of scary sharp 440-C stainless steel, 3/16 inches thick, with a thumb ramp and jimping.  Overall length of 9 3/4 makes this a nice little compact skinner.  The cross guard is 3/8 on this one, but if you prefer I can make it with a 1/4 inch cross guard. Blue and white spacer material accents the Cocobolo handle kept tight with 3/16 Corby bolts. Like all my knives you get to pick the spacer and handle material. Hollow ground as well. This knife sells for $80.00 with the custom sheath, shipping is free. Just go to the order form page to buy it.





Bush craft knife






This is a custom Bush craft knife with a Cerakote coating on the whole thing, This is 3/16 440-C stainless steel with Navy Corian scales and German silver hardware. This knife will sell for $165.00 the way it is set up here along with a Kydex sheath. If you would like one just contact me through the contact page or the custom quote page. Or email me from here.







Tanto style knife






This is a custom order Tanto blade, started with 3/16th 440-C stainless steel, ended up up just above 5/32. It has thumb gimping and German silver bolsters and butt guard, the blade is 7 inches, with an overall length of 11.5 inches. If interested in one like it just email me.






Small Bush craft knife






Another custom Bush craft knife made special order for the customer. Also 3/16 440-C stainless steel this knife has a 4 inch blade with a scandi grind and seondary bevel. There was also a request for a satin finish on this knife. It sports Cocobolo scales with brass hardware. This knife was delivered with a leather sheath and case. If interested in one like it just email me.










Custom Bowie




This is a custom Bowie knife with some etching on the blade. Along with a custom sheath with the owners name on it. The blade is 9 inches long made from 440-C stainless steel. The handle is a solid piece of Arizona Iron wood with some black Corian spacers, finished off with German silver hardware. One like this would cost $200.00 to $250.00








This is a fighter style and has a 7.25 inch blade, 440-C stainless steel, with a stainless steel cross guard, Micarta spacer, German silver spacer with a Zebra wood handle. This knife comes with a leather sheath. and ships for free.
 
fighter
 
fighter
 
fighter
 
fighter
 








This is a custom order knife made for a young girl. The whole knife is 8.5 inches long with 4.25 of that being blade. Stainless steel guard and butt with a laynyard hole. The handle is Bloodwood with a stripe of Walnut going through it. The blade also has thumb gimping. The design was a combined effort between her Dad and myself.






This one is a 9 inch Bowie with German silver cross guard and pommel. The Cocobolo handle is accented with turquoise and some more German silver. The blade is 3/16 inch thick 440-C stainless steel. Blood grooves are also present on this knife but could be left off if you like. This knife sold for $250.00 and shipped with a leather sheath.



















This one was a custom order Bowie with a Mule deer antler crown. Ten full inches of blade with red, black, yellow spacers, and a piece of Buffalo horn, along with a couple of 3/16 brass spacers, then the Mule deer antler. The cross guard is 1/4 inch brass. This one is one sweet knife.



This is a Bowie I made for a show. It has a 7.25 inch blade by about 2 inches. Brass cross guard and solid brass pommel with a deer antler handle. This knife also has blood grooves. Which is why I am selling it here, the blood grooves are not 100%. They are slightly off on each end. So the price will reflect that as well. If you would like to see the close ups of the grooves let me know. The price for this knife is $125.00, and can be purchased on the in stock page.
 
bowie
 
bowie
 







Custom Mule deer Bowie



Another custom Bowie with a Mule deer antler handle. This knife is 8 inches long with brass hardware and a large brass transition piece. Made from 440-C stainless. Custom sheath to go with it. This knife is a bit heavy but you know you are holding it that is for sure. One like this would cost right about $250.00.









Wedding

This was a special order for a wedding set done with Tiffany blue and yellow accents. The handles were custom made by myself and held on with stainless cutlery rivets. There is no price for these as they are highly custom if you would like a price contact me with what you would like.




Here is some handle material
 
 
Bocote
 
This is Bocote
A hard dense wood from Mexico
 
bloodwood
 
This is Blood Wood with a strip of Walnut running through it
 
Horn
 
Buffalo horn jigged and flamed
 
jean
 
Blue jean (Levis) Micarta made by myself
 
 

 
 
 
 
 
 
LEGAL:   Must Be 18 years old to purchase its the LAW. The maker / owner or its affiliates of  Rebel Blades are NOT responsible should you, hurt, cut, maim or kill any animals, yourself or others with our knives.  Seek professional guidance before using our knives. By accepting and using this our knives  you are accepting all responsibilities and will NOT hold the maker / owner or its affiliates or Rebel Blades responsible for ANY Illegal activities or lawsuits. You are responsible for knowing your own states laws.